An asbestos removal supervisor plans, prepares and oversees a licensed asbestos removal job from start to finish. That means coordinating air monitoring and testing, managing site safety, and confirming the work area is clear before anyone leaves.
In NSW, the role sits inside SafeWork NSW’s asbestos removal licensing system. Our complete guide includes details of our asbestos supervisor course, what the job involves, what’s required to do it, and how the licensing actually works.
What Does an Asbestos Removal Supervisor Do?
The role, which Sydney Safety Training lists as CPCCDE4009 on its current asbestos removal training course pages, is LO accepted under codes CPCCDE4008 or CPCCBC4051 on SafeWork NSW’s own supervisor nomination form.
In practice, it incorporates four stages of a removal job:
- Planning the job
Reading the asbestos register and client brief, developing the asbestos removal control plan (ARCP) and safe work method statement, confirming staff competency and organising air monitoring with a licensed assessor before work starts. - Preparing the site
Inducting workers, setting up PPE and signage, isolating the work area, and making safe any utilities that need to be disconnected. - Overseeing testing
Liaising with the licensed asbestos assessor on air monitoring, checking results against the legal limit, and notifying SafeWork NSW if fibre levels exceed 0.02 fibres per millilitre. - Managing removal and decontamination
Supervising the actual removal against the ARCP, organising compliant waste disposal, and keeping the site secured until a clearance certificate is issued.
Rest assured, this is a hands-on role, not a paperwork one. The supervisor is the person on-site making sure the job stays safe and compliant while it’s happening.
Class A vs Class B Supervisor Requirements
Requirements differ depending on which licence the supervisor is nominated onto (more on what that means below).
Asbestos training required
Remove friable asbestos (CPCCDE3015) plus Supervise
Remove non-friable asbestos (CPCCDE3014) plus Supervise
Asbestos Removal (CPCCDE4009, CPCCDE4008 or CPCCBC4051A)
Asbestos Removal (CPCCDE4009, CPCCDE4008 or CPCCBC4051A)
Asbestos experience required
At least 3 years' friable asbestos removal work, across at least 3 documented jobs
At least 12 months' non-friable asbestos removal work, across at least 3 documented jobs
On-site presence
Must be on site while the work is carried out
Must be able to be on site within 20 minutes
Evidence needed
Employer reference letter plus job records from the past 5 years
Employer reference letter plus job records from the past 5 years
Sole traders are the one exception. SafeWork NSW will accept separate evidence of a sole trader’s training, skills and experience in place of an employer reference letter, verified on a case-by-case basis.
Is There a Separate Asbestos Removal Supervisor Licence in NSW?
No, and this is worth being direct about, because people looking for this term might get confused.
SafeWork NSW doesn’t issue an individual “asbestos removal supervisor licence.” The licences that exist are the Class A and Class B asbestos removal licences, held by the business or sole trader carrying out the removal work. A supervisor is nominated onto that licence using the supervisor nomination form (SW08901), submitted with the licence application.
That distinction matters in practice: the qualifications and experience described above rest with the person, but the legal obligation rests with the licence holder. If you’ve been told to “get a supervisor licence,” what you actually need is the Supervise Asbestos Removal training, the industry experience, and a licence holder willing to nominate you.
How to Become a Nominated Asbestos Removal Supervisor
Becoming a nominated supervisor follows a set sequence:
- Hold a current White Card (CPCCWHS1001)
- Complete the relevant removal unit
Remove friable asbestos (CPCCDE3015) for Class A, or Remove non-friable asbestos (CPCCDE3014) for Class B. You can also combine the two with a Friable and non-friable asbestos course. - Complete Supervise Asbestos Removal (CPCCDE4009)
Commonly known as asbestos supervisor training, or an asbestos supervisor ticket once it’s issued. - Build the required industry experience under a licensed supervisor
Three years across three Class A jobs, or 12 months across three Class B jobs. - Gather supporting evidence
Job records, dates, asbestos type and quantity, and an employer reference letter. - Be nominated on the supervisor nomination form (SW08901)
Submitted with the licence application through Service NSW.
Sole traders without an employer to provide that reference letter can have their training, skills and experience assessed separately by SafeWork NSW.
Asbestos Removal Supervisor vs Asbestos Assessor
These two roles get confused because they both show up on the same job site, but they’re separately licensed and do different work.
- An asbestos supervisor manages the removal itself, including the planning, crew, site safety, and decontamination.
- An asbestos assessor is independently licensed to test the air, inspect the enclosure and issue the clearance certificate that lets a supervisor sign the job off.
❗A supervisor can’t assess their own job, and an assessor doesn’t run the removal. Larger sites will have both roles filled by different people.
Contact Us About an Asbestos Removal Supervision Course
Need the Supervise Asbestos Removal unit to nominate a supervisor, or want to check whether your current experience qualifies? Our one-day Supervise Asbestos Removal course covers CPCCDE4009 at our Villawood training centre, and sits within our broader asbestos removal training.
Asbestos Removal Supervisor Licence NSW - FAQs
No. SafeWork NSW licenses the business as Class A or Class B, not the individual supervisor. A supervisor is nominated onto that licence using the SW08901 nomination form, based on their training and industry experience.
At minimum, 12 months for a Class B nomination or three years for a Class A nomination, because that’s the industry experience SafeWork NSW requires on top of the training. The training itself (White Card, the relevant removal unit, and Supervise Asbestos Removal) can be completed in a matter of days; the experience requirement sets the real timeline.
There’s no separate renewal date for the nomination itself, but it’s tied to the business’s licence. SafeWork NSW requires the licence holder to confirm all nominated supervisor details are current every time the Class A or Class B licence is renewed.
It puts the licence itself at risk. Supervisor presence – on site for Class A work, within 20 minutes for Class B – is a condition of the licence, and SafeWork NSW enforces licence conditions through audits, improvement notices, and licence suspension or cancellation for serious or repeated non-compliance.
About the Author:
Luke Downie is the Operations Manager at Sydney Safety Training, overseeing the day-to-day running of the business, from course bookings to customer support and general enquiries. Before joining Sydney Safety Training, Luke spent 28 years managing a recreational diving centre, where he built a strong background in business development and customer relations. Outside of work, he’s a keen fisherman, golfer and cricketer, and enjoys spending time with his family, including his three daughters.