Gas Monitors

Gas checks prior to entering a confined space can be carried out by lowering your gas monitor via a drop line.  If this is not suitable you can purchase a monitor with a built in pump and connect a long small hose to be inserted into the space.  The type of gas monitor you require is obviously dependentPreview Changes (opens in a new tab) on your needs.  ALL 4 gas monitors are configured to detect the two most common toxic gases,  hydrogen sulphide (H2S) & carbon monoxide (CO); they look for the flammable gas of methane (CH4) and they measure the actual level of oxygen (O2).

If you have other gases that may be present, you may need to buy an additional single gas monitor for that gas, or see if you can have your four gas monitor changed to include that gas.  Remember that if you change it, you will need to remove one of the toxic sensors.

We also calibrate your gas monitors, which is required six monthly.

We also supply five gas monitors and PID Gas monitors… see below.

Remember staff using gas monitors need to be trained in their proper use.  We can provide that training..

 

 

ALTAIR® 4XR Multigas Detector

• Outfitted with rapid-response MSA XCell® sensors, the ALTAIR 4XR Gas Detector is the toughest 4-gas monitor on the market
• 4 year warranty on sensors
• provides via blue tooth real time incident awareness to team members, supervisors and safety managers when paired with the MSA app
• the unit shows a large TICK when bumped each day

Can be purchased in kit form as above, or individually.

Information Brochure

ALTAIR® 5X Multigas Detector

• Capable of measuring up to six gases
• available with integrated PID sensor for VOC detection
• Driven by MSA XCell Sensor Technology
• Delivers faster response time, better stability, accuracy, longer service life and cost savings of life of instrument.

Riken GX3R Personal 4 Gas Monitor

• Smallest & lightest 4 gas monitor
— 2.2″ W x 2.55″ H x 1.02″ D, 3.52 ounces
• Simultaneous detection of 4 gases
— LEL, O2, H2S & CO
— H2 Compensated CO sensor available
• Simple 2-button operation
• Non-Compliance Indicator
• Alarms: audible, visual, & vibration
• 3 user adjustable alarm levels
• Impact resistant body with removable rubber boot
• Large LCD Auto-backlit display
• 25 hours of operation (Lithium-ion battery)
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• Stealth mode for law enforcement
• 3 Year warranty

Information Brochure

 

GX-2012 4 Gas Monitor with pump  

• Monitors LEL CH4, O2, CO & H2S
• 0 to 100% Methane option
• Auto-ranging display of % LEL & % volume
• Internal pump with up to 15m range
• Vibration, visual & audible alarms
• Auto back light during alarms
• Calibration reminder with lock option
• Quick charge = 90 minutes
• Glove friendly
• Alarm latching or non latching
• High impact protection

 

 

 

 

Honeywell GasAlert MicroClip X3     

 

Comprehensive multi-gas monitoring

Detects Hydrogen Sulphide, Carbon Monoxide, Oxygen and combustibles (%LEL)

Designed for use in tough environments

IP 66/67 rating and built-in concussion-proof boot. Loud audible, visual and vibrational alarms for use in high noise locations

Easy use with minimal training

Simple one button operation, intuitive interface and continuous LCD showing real-time gas concentrations

Simplifies compliance

IntelliFlash™ provides visual confirmation of device compliance to user and supervisor, helping to increase site safety and simplify portable fleet management

Works hard all day

Lithium polymer battery provides long run time (10 hours), whilst benchmark sensors ensure accurate, high-performance detection of flammable, toxic and Oxygen gas hazards

Easy and cost-effective to maintain

Works with BW Technologies by Honeywell’s MicroDock II automatic test and calibration system

Flexible user options

Device offers a variety of user defined options including; Auto zero on start up, Oxygen auto calibration on start up, force bump test when overdue and the choice of 5 languages

Cost of unit is $1250.00 + gst